PLANNING

Managing Subcontracted Weaving: Tracking Yarn, Beams and Fabric

Tracking yarn, beams, fabric and cost across subcontracted weaving, yarn dyeing, twisting and sizing.

· 4 min read · Egemen Yazılım

Weaving mills may outsource certain production stages because of limited capacity, the need for specialized machinery or cost advantages. In addition to subcontracted weaving, preparation processes such as yarn dyeing, twisting and sizing are also frequently outsourced. During these operations, yarn, warp beams and fabric move between different companies, making accurate tracking of these movements essential.

Types of Subcontracting Processes

  • Subcontract yarn dyeing: The mill sends its greige yarn to a dyehouse and receives the dyed yarn in return. This is common among manufacturers producing yarn-dyed fabrics.
  • Subcontract twisting: Yarns are sent to a twisting mill to be converted into plied or twisted yarn.
  • Subcontract sizing: Warped yarns are sent to a sizing facility and returned as sized warp beams.
  • Subcontract weaving: Prepared warp beams and weft yarns are sent to a subcontract weaver, who returns the greige fabric.

In each of these processes, the materials remain the property of the mill but are physically located at another company’s facility. This makes inventory tracking, waste calculation and quality control more complex.

Tracking Yarn Movements

Every yarn movement in a subcontracting process should be recorded. The yarn type, lot, quantity and order reference must be registered when it is sent to the subcontractor. Each subcontractor can be defined as a separate warehouse in the system, making it possible to see how much yarn is held at each facility at any time.

The weight of yarn may change during subcontract dyeing. Therefore, the difference between the greige yarn sent and the dyed yarn received should be assessed against acceptable process-loss tolerances. The dyed yarn should also be recorded under a new lot and linked to the original greige yarn lot to preserve the traceability chain.

Tracking Warp Beam Movements

In subcontract weaving, warp beams are dispatched to the subcontractor. Each beam barcode is scanned during dispatch, transferring the beam to the subcontractor’s inventory in the system. As the subcontractor weaves the beams, fabric is returned to the mill. Waste can be calculated for each beam by comparing the warp yarn contained in it with the theoretical warp consumption of the fabric received.

In subcontract sizing, intermediate beams that have already been warped are sent out, and sized weaving beams are received in return. The quality of the returned beams can be evaluated using sizing inspections and breakage data collected during weaving, providing a basis for assessing the subcontract sizing company’s performance.

Tracking Fabric Movements

Greige fabric received from subcontractors should be recorded roll by roll. The length, weight, width and quality status of each roll must be checked, and its originating warp beam and weft yarn should be identifiable. Incoming fabric inspection is particularly important because the mill does not have direct control over the subcontractor’s loom settings or maintenance practices. Monitoring quality results by subcontractor also makes it possible to compare their performance.

Tracking Subcontracting Costs

Subcontracting costs consist of more than the labour charge paid to the subcontractor. The actual cost includes:

  • Subcontract processing charges.
  • Outbound and return transportation costs.
  • Yarn and fabric waste at the subcontractor.
  • Losses caused by quality problems.
  • Time spent on tracking, coordination and documentation.

When all these items are consolidated at order level, the actual costs of subcontracted and in-house production can be compared. This makes it possible to decide, based on data, which operations are more advantageous to perform internally and which should be outsourced.

Stock Reconciliation

At regular intervals, the actual stock held by each subcontractor should be compared with the stock recorded in the system. The quantities of yarn, warp beams and fabric dispatched to the subcontractor, received back and still held at the subcontractor’s facility should be checked together. Agreeing on waste tolerances, moisture differences and measurement methods in advance makes reconciliation easier and helps prevent disputes.

Planning In-House and Subcontract Production

Effective subcontract management begins during planning. When orders are scheduled, in-house capacity and subcontract capacity should be evaluated together. If subcontractors’ machine specifications, capacities and lead times are defined in the planning system, managers can quickly assess whether an order should be outsourced. The progress of subcontracted work should also be monitored in the same way as in-house production.

Documentation

Dispatch notes, subcontractor invoices and return documents generated during subcontracting should be linked to the corresponding inventory transactions in the system. This ensures accurate accounting records and supports compliance with applicable regulations.

Evaluating Subcontractor Performance

Subcontractors should be evaluated regularly using criteria such as delivery performance, waste rate, quality score and response time. These evaluations make it easier to decide which subcontractor should handle each type of work and help establish more effective business relationships.

Conclusion

Subcontracted weaving, yarn dyeing, twisting and sizing give weaving mills greater flexibility in capacity and technical capabilities. To ensure that this flexibility does not turn into avoidable losses, yarn, beam and fabric movements must be tracked, waste must be calculated by subcontractor and total subcontracting costs must be visible at order level. Managing in-house and subcontracted operations within the same system is the foundation for achieving this level of control.

All Weaving articles
THE NEXT STEP

Let’s Shape the Future of Your Production

Talk to Our Experts