Dry Section Data Collection in Textile Manufacturing
How to collect production data from dry-section machines, monitor operating conditions and production parameters, and improve visibility across textile manufacturing processes.
In a dyehouse, the dry section is the area containing stenters, sanforizers, dryers and other finishing machines that process fabric after dyeing and washing. Fabric width, weight, shrinkage and handle are largely determined at this stage. The dry section is also one of the most energy-intensive areas of a dyehouse. For this reason, dry section data collection is one of the automation initiatives that can deliver the fastest returns.
What Data Should Be Collected in the Dry Section?
- Machine operating status, speed and the active work order or batch
- Left and right chamber temperatures and setpoints on stenters
- Fan operating percentages and fabric overfeed values
- Fabric width at the inlet and outlet
- Fabric moisture and surface temperature
- Electricity and natural gas consumption per batch
How Is the Data Collected?
Most modern finishing machines are controlled by a PLC. In an approach also known as dyehouse data collection, process values are read automatically through direct communication with the machine's PLC. When two-way communication is established, the system does more than collect data: it can also send the defined stenter recipe and setpoints to the machine. This eliminates manual parameter entry by operators and reduces the risk of incorrect settings. For older machines without PLC communication, IoT devices can be used to collect operating status, downtime and energy consumption data.
What Is the Collected Data Used For?
Process values collected at batch level show whether the fabric was actually processed under the conditions specified in its recipe. When fabric moisture, surface temperature and machine speed are displayed on a timeline, reports can show the percentage of time spent within or outside specified ranges. If a batch develops a width or shrinkage problem, its stenter conditions can be reviewed within minutes.
- Quality: Deviations from recipes become visible at batch level, helping identify recurring problems.
- Energy: Actual natural gas and electricity consumption per batch can be included in product costing.
- Efficiency: Speed, downtime and setup times can be measured for each machine.
- Repeatability: Approved batch conditions can be stored as recipes and sent to the machine again.
Where Should You Start?
The first step is to list the machines in the dry section and identify the communication capabilities of each one. You can then start with the stenter that consumes the most energy or causes the most quality issues. Integrating the collected data with batch records in the dyehouse software makes dry section monitoring an integral part of the dyehouse management and automation system.
