FUNDAMENTALS

Basic Knitted Fabrics: Single Jersey, Rib, Interlock and Piqué

The most common knitted fabrics, their structures, the machines they are knitted on and the products they are used for.

· 4 min read · Egemen Yazılım

Knitted fabrics have different structures depending on how their loops are formed and the type of machine used. These structures determine fabric elasticity, thickness, weight, handle and application. In this article, we examine the most common types of knitted fabric, their structural differences and their areas of use.

Single Jersey

Single jersey is the most basic and widely used weft-knitted fabric. It is knitted on single-bed circular knitting machines using knit stitches only. Vertical loop columns are visible on the face, while horizontal loop arcs appear on the back; as a result, the two sides are visibly different.

  • Characteristics: A fine, lightweight and soft fabric with elasticity across its width. It tends to curl at the edges.
  • Applications: T-shirts, underwear, pyjamas, dresses and linings.
  • Variations: It can be produced using different yarn combinations, such as elastane single jersey, combed cotton single jersey and viscose single jersey.

Rib

Rib is a double-knit fabric in which vertical columns of knit stitches alternate between the face and back. It is knitted on double-bed machines using both cylinder and dial needles. The most common types are 1x1 and 2x2 rib; these names describe the sequence of stitch columns on the face and back.

  • Characteristics: It has very high crosswise elasticity and returns to its original shape after stretching. It does not curl at the edges, and its two sides are similar.
  • Applications: Collars, cuffs, waistbands, fitted T-shirts and vests, and womenswear.

Interlock

Interlock is a double-knit fabric formed by intermeshing two rib structures. Both sides are smooth and flat, resembling the face of single jersey. It is knitted on double-bed machines with a special needle arrangement.

  • Characteristics: A thick, full-bodied, soft and dimensionally stable fabric. It does not curl at the edges and is less prone to laddering. It is less elastic than single jersey.
  • Applications: Baby and children’s clothing, polo shirts, tracksuits and heavier T-shirts.

Piqué

Piqué is a single-knit fabric formed by combining knit and tuck stitches in a specific arrangement. Tuck stitches create a small, raised, honeycomb-like texture on the fabric surface. Different types include Lacoste piqué and double Lacoste.

  • Characteristics: Its textured surface allows it to breathe and makes it less clingy against the skin. It is thicker and less elastic than single jersey.
  • Applications: Polo shirts, sportswear and summer tops.

Other Common Knitted Fabrics

  • Two-thread and three-thread fleece: Fabrics knitted with an additional yarn on the back. Three-thread fabric is often brushed on the back to create a thick and warm fabric. Commonly used for sweatshirts and tracksuits.
  • Ottoman rib: An elastic fabric with prominent vertical lines, similar to rib.
  • Terry: A soft fabric with loop pile on one side.
  • Jacquard fabrics: Patterned fabrics knitted using electronic needle selection.
  • Scuba and spacer fabrics: Modern, thick, shape-retaining double-layer fabrics.

How Does Fabric Type Affect Production?

Each fabric type requires a different machine type, yarn and set of machine settings. These differences affect every stage of production management:

  • Machine selection: Single jersey and piqué are knitted on single-bed machines, while rib and interlock are knitted on double-bed machines.
  • Production speed: The number of courses knitted per revolution and machine speed vary according to fabric structure.
  • Yarn consumption: Fabric structure and stitch length determine yarn consumption per metre.
  • Weight and width: Different structures produce different fabric weights and widths on the same machine.
  • Finishing behaviour: Shrinkage and width changes after dyeing vary according to fabric type.

The Importance of Fabric Specifications

Knitting mills should maintain a detailed fabric specification for each fabric type. This specification should include the fabric structure, yarns used and their percentages, machine type, diameter and gauge, stitch length, target weight and width, yarn consumption and quality standards. Accurate and complete fabric specifications enable correct machine selection during planning, accurate yarn requirement calculations and consistent quality on repeat orders.

In addition, clarifying the values in the fabric specification during sample approval with the customer helps prevent disputes about weight or width after production. Keeping the approved sample together with the specification provides a reference when the same fabric is reordered months later.

Conclusion

Single jersey, rib, interlock and piqué are the fundamental structures of knitted fabrics. The structural properties of each determine its applications and production requirements. Understanding fabric types and their effects on production is essential for knitting mills to respond accurately to customer requirements and manage production efficiently.

All Knitting articles
THE NEXT STEP

Let’s Shape the Future of Your Production

Talk to Our Experts