AUTOMATION

Process Monitoring on Stenters and Finishing Machines via PLC

How minute-level PLC data from stenters, sanforisers and dryers improves quality and repeatability, and how values can be reused as recipes.

· 4 min read · Egemen Yazılım

After dyeing, fabric usually passes through finishing machines such as stenters, sanforising machines, dryers and compactors before being delivered to the customer. These machines determine the fabric width, weight, shrinkage properties, handle and appearance. Correctly setting and monitoring process parameters on finishing machines is therefore just as important as dyeing for the quality of the final product.

What Does a Stenter Do?

A stenter is a machine that holds fabric by its edges using pins or clips and passes it through hot-air chambers. It is used for processes such as drying the fabric, bringing it to the required width, fixing finishing chemicals and heat-setting synthetic fabrics. The settings applied on a stenter directly determine the final width, weight and shrinkage properties of the fabric.

Critical Process Parameters

  • Temperature: The temperature of each chamber, which determines drying, fixation and heat-setting conditions.
  • Speed: The speed at which fabric passes through the machine and the resulting dwell time in each chamber.
  • Width setting: The fabric width at the machine inlet and outlet.
  • Overfeed: The percentage by which fabric is fed in excess in the lengthwise direction; this affects fabric weight and lengthwise shrinkage.
  • Fan speed and airflow: Their effects on drying efficiency and the fabric surface.
  • Moisture and exhaust: The moisture level inside the chambers and its impact on energy efficiency.
  • Padding pressure: The amount of finishing chemicals impregnated into the fabric.

Even small deviations in these parameters can cause width variations, weight deviations, colour changes or shrinkage problems.

Why Monitor Processes Through PLCs?

In traditional practice, operators set machine parameters using recipe cards or their own experience, and the values used are recorded manually, if at all. With this approach, it is difficult to ensure that the same product is processed under identical conditions across different shifts or by different operators. When a quality problem occurs, there may be no record of the actual parameters used to process the fabric.

Modern finishing machines are controlled by a PLC. The PLC continuously measures and controls parameters such as temperature, speed, overfeed and width. Reading these values from the PLC and recording them minute by minute creates a permanent record of the actual conditions under which each fabric batch was processed.

How Minute-Level Data Improves Quality and Repeatability

  • Process parameters are recorded for every batch, allowing retrospective investigation of customer complaints.
  • Deviations from the values defined in the recipe can be detected immediately and trigger alerts.
  • Differences in operating practices between shifts and operators become visible.
  • Comparing quality control results with process parameters helps identify the settings that deliver the best results.
  • Machine operation, downtime and speed data can be used for efficiency analysis.

Using Process Parameters as Recipes

One of the most important benefits of PLC integration is the ability to save process parameters that have delivered successful results as a product recipe. When a product is processed for the first time and passes quality control successfully, the temperature, speed, overfeed and width values used can be saved as the standard recipe for that product. When the same product is processed again, this recipe can be sent to the machine or displayed to the operator. Settings are therefore based on recorded and approved data rather than individual experience.

This approach is particularly valuable because it preserves the knowledge and experience of skilled operators within the business. New operators can achieve consistent results in a shorter time by using approved recipes.

Monitoring Energy Consumption

Stenter machines are among the largest consumers of thermal energy in a dyehouse. Monitoring energy consumption together with machine operating parameters makes it possible to calculate energy costs by product. When machines are found to be operating at unnecessarily high temperatures or low speeds, energy savings can be achieved without compromising quality. Idle operating periods and unnecessary heating also become visible through this data.

Other Finishing Machines

The same approach can be applied to other finishing machines, including sanforising machines, compactors, dryers and raising machines. Monitoring critical parameters such as compression ratio and temperature on sanforising machines, feed and pressure settings on compactors, and temperature and speed on dryers helps ensure repeatable quality at these stages as well.

Implementation Considerations

  • Access to the machine PLC and the communication protocol used should be identified in advance.
  • The parameters to be read and the frequency of data collection should be defined according to operational needs.
  • Readings must be associated with the relevant fabric batch and work order; otherwise, the data loses its meaning.
  • A structure should be established to prevent data loss during network interruptions.
  • Operators should be able to start and finish work orders using the screens installed at the machines.

Conclusion

PLC-based process monitoring on stenters and finishing machines ensures that the parameters determining the final fabric quality are recorded for every batch. These records make it possible to detect deviations immediately, investigate quality problems retrospectively and reuse successful settings as recipes. As a result, finishing becomes a measurable and repeatable process rather than an operation dependent on individual operators.

All Dyehouse articles
THE NEXT STEP

Let’s Shape the Future of Your Production

Talk to Our Experts